Loading... Please wait...

PRODUCT TESTING RESULTS

PRODUCT TESTING RESULTS

We've tested the Kevlar fabric use for the inner layer and our proprietary abrasion resistant fabric that is used for the outer layer of the Leggings and Base Layer in the following manner:

We had a lab in the UK (SATRA) conduct what is known as the “Martindale” test, the most commonly used method for testing for abrasion resistance in fabric where they apply a sanding disc to the fabric and run it in circles on the fabric over thousands of cycles. The leggings fabrics tested as follows: the outer layer of fabric abraded after 100,000 cycles. The inner layer of fabric that is woven with the Kevlar fibers, abraded after 40,000 cycles so between the two fabrics, it abraded after 140,000 cycles. The lab test results are below.

Test results for the protective armor used in our garments are below the fabric test results below.

gogo-gear-leggings-abrasion-resistance-test-report-21049-14-page-1.jpggogo-gear-leggings-abrasion-resistance-test-report-21049-14-page-2.jpggogo-gear-leggings-abrasion-resistance-test-report-21049-14-page-3.jpg

armor-test-sw-101-1.jpg

armor-test-sw-102-1.jpg

armor-test-sw-111-and-112-1.jpg