THE "SIGNAL JACKET"

$179.00
(No reviews yet) Write a Review
SKU:
JSIG18
Availability:
Usually ships within 24 hours unless out of stock.
Weight:
4.00 LBS
Shipping:
Calculated at Checkout

THE GOGO GEAR "SIGNAL JACKET"

GoGo Gear Directional Signal and Brake Light Protective Armored Hoodie with DuPont Kevlar® Fibers

Now you can have more confidence that you're riding safe with cars behind you! Get the increased visibility you've always been looking for!

 

UNISEX HOODIE PRODUCT DESCRIPTION

GoGoGearLA’s Signal Jacket Hoodie, shown for convenience in both the women’s and men’s section of the store, is styled as typical “street” hoodie.  It is not tailored to fit the contoured chest or waist areas. The hoodie is of equal dimension in the chest and waist area so that it is much more of a comfort fit.  When ordering, note the hoodie will and should fit loosely; for a snugger fit, order one size smaller.

There is EU approved armor padding the back, shoulders and elbows.  Kevlar in located throughout the entire jacket.  The Kevlar fabric is hidden by a perforated mesh lining, that is used to hold the protective pads (armor) in place.  The Kevlar and mesh linings are sewn to the outer layer which is made of heavy duty sweatshirt materials.

 

FEATURES

Directional Signal and Brake Light Technology in Back of Jacket Using LED Lighting (Includes lighting wiring harness)

Extra High Collar To Prevent Wind From Entering Jacket

Heavy Duty Cotton Outer Shell

Full Inner Lining Made Of 100% of DuPont Kevlar Fibers®

Mesh Lining

Removable CE-Approved Armor in Shoulders and Elbows, Back Protector Also Included

Zippered Side Pockets

Extra Deep Side Pockets

Inside Cellphone Pocket

Zippered Underarm Air Vents

All YKK Zippers

Ribbed Knit Cuffs

Elastic Ribbed knit Waistband

Drawstring Closure For Hood

Available Colors: Black Outer Shell Fabric With Red Inside Lining

Machine washable (WARNING! YOU MUST REMOVE THE LED LIGHTS AND WIRING FROM THE JACKET WHEN WASHING)

 

WASHING INSTRUCTIONS:

DO NOT WASH WITH LED LIGHTS OR WIRING REMAINING IN JACKET. THEY MUST BE REMOVED BEFORE WASHING THE JACKET.

Wash in COLD water with mild detergent. Hang to dry OR dry on the AIR setting. You do NOT need to remove the protectors when washing the garment.

 

Unisex Sizes:

Please note that our hoodies run "true" to size, so if you're a 36" chest/bust, then go with the XS, and so forth. Just follow the size chart and you'll be able to locate the best size for you.

CHEST AND WAIST SIZE ARE THE SAME

SIZES

XXS - 32

XS - 36

S - 40

M - 44

L - 46

XL - 50

2XL - 54

3XL - 58

EXTRA LIMITED WARRANTY FOR THE "SIGNAL JACKET"

NOTE: The "Signal Jacket" is NOT waterproof. Care should be taken to ensure the lights and inside wiring do not get wet. DO NOT launder the jacket with the LED lights and wiring left inside the jacket. GoGo Gear will not be responsible for any damage or defect to the LED lights or wiring in the event the jacket gets wet.

 

INSTALLATION INSTRUCTIONS:

There is a large zipper in the red mesh back of the jacket where the back protector is. If you open that zipper, you'll find the cable that connects the jacket to the bike.

Next, the cellphone pocket will have another cable in it. This is the cable you will use to connect to the lighting wiring on the bike. If you're a DIYer like some people, you take the four wires (one black, white, red and green) and connect them to the various lighting wires. Recommended wiring: use the white wire for the ground, the black wire for the brake light, the green and red lights for the turn signals.

Next, you'll connect the four wires to the four wires on the bike and use a crimping tool to crimp plastic male and female terminal connectors making sure to not crimp it so tight that you cut the wire. Once the wires are connected, you are all set to go!

If you're not a DIYer, you can take the jacket and bike to a knowledgeable friend or your local car or bike shop and they can connect them for you! It can be done really quickly! If you happen to have a copy of the lighting diagram/schematic for your particular bike, that would be incredibly helpful for whomever you get to make the connection for you!

HAPPY AND SAFE RIDING!!!

THE GOGO GEAR "SIGNAL JACKET"

GoGo Gear Directional Signal and Brake Light Protective Armored Hoodie with DuPont Kevlar® Fibers

Now you can have more confidence that you're riding safe with cars behind you! Get the increased visibility you've always been looking for!

 

UNISEX HOODIE PRODUCT DESCRIPTION

GoGoGearLA’s Signal Jacket Hoodie, shown for convenience in both the women’s and men’s section of the store, is styled as typical “street” hoodie.  It is not tailored to fit the contoured chest or waist areas. The hoodie is of equal dimension in the chest and waist area so that it is much more of a comfort fit.  When ordering, note the hoodie will and should fit loosely; for a snugger fit, order one size smaller.

There is EU approved armor padding the back, shoulders and elbows.  Kevlar in located throughout the entire jacket.  The Kevlar fabric is hidden by a perforated mesh lining, that is used to hold the protective pads (armor) in place.  The Kevlar and mesh linings are sewn to the outer layer which is made of heavy duty sweatshirt materials.

 

FEATURES

Directional Signal and Brake Light Technology in Back of Jacket Using LED Lighting (Includes lighting wiring harness)

Extra High Collar To Prevent Wind From Entering Jacket

Heavy Duty Cotton Outer Shell

Full Inner Lining Made Of 100% of DuPont Kevlar Fibers®

Mesh Lining

Removable CE-Approved Armor in Shoulders and Elbows, Back Protector Also Included

Zippered Side Pockets

Extra Deep Side Pockets

Inside Cellphone Pocket

Zippered Underarm Air Vents

All YKK Zippers

Ribbed Knit Cuffs

Elastic Ribbed knit Waistband

Drawstring Closure For Hood

Available Colors: Black Outer Shell Fabric With Red Inside Lining

Machine washable (WARNING! YOU MUST REMOVE THE LED LIGHTS AND WIRING FROM THE JACKET WHEN WASHING)

 

WASHING INSTRUCTIONS:

DO NOT WASH WITH LED LIGHTS OR WIRING REMAINING IN JACKET. THEY MUST BE REMOVED BEFORE WASHING THE JACKET.

Wash in COLD water with mild detergent. Hang to dry OR dry on the AIR setting. You do NOT need to remove the protectors when washing the garment.

 

Unisex Sizes:

Please note that our hoodies run "true" to size, so if you're a 36" chest/bust, then go with the XS, and so forth. Just follow the size chart and you'll be able to locate the best size for you.

CHEST AND WAIST SIZE ARE THE SAME

SIZES

XXS - 32

XS - 36

S - 40

M - 44

L - 46

XL - 50

2XL - 54

3XL - 58

EXTRA LIMITED WARRANTY FOR THE "SIGNAL JACKET"

NOTE: The "Signal Jacket" is NOT waterproof. Care should be taken to ensure the lights and inside wiring do not get wet. DO NOT launder the jacket with the LED lights and wiring left inside the jacket. GoGo Gear will not be responsible for any damage or defect to the LED lights or wiring in the event the jacket gets wet.

 

INSTALLATION INSTRUCTIONS:

There is a large zipper in the red mesh back of the jacket where the back protector is. If you open that zipper, you'll find the cable that connects the jacket to the bike.

Next, the cellphone pocket will have another cable in it. This is the cable you will use to connect to the lighting wiring on the bike. If you're a DIYer like some people, you take the four wires (one black, white, red and green) and connect them to the various lighting wires. Recommended wiring: use the white wire for the ground, the black wire for the brake light, the green and red lights for the turn signals.

Next, you'll connect the four wires to the four wires on the bike and use a crimping tool to crimp plastic male and female terminal connectors making sure to not crimp it so tight that you cut the wire. Once the wires are connected, you are all set to go!

If you're not a DIYer, you can take the jacket and bike to a knowledgeable friend or your local car or bike shop and they can connect them for you! It can be done really quickly! If you happen to have a copy of the lighting diagram/schematic for your particular bike, that would be incredibly helpful for whomever you get to make the connection for you!

HAPPY AND SAFE RIDING!!!

SHIPPING

We can ship to virtually any address in the world. GoGo Gear may offer a shipping promotion at their discretion. Outside of the promotion period, customers pay the initial shipping cost on orders, and any shipping costs associated with returns or exchanges, unless the item is defective, damaged or incorrect before you receive it.

INTERNATIONAL SHIPPING & RETURNS

International orders are generally processed through the US Postal Service.  Shipping costs are estimated based on weight and the destination country and generally arrive within two-three weeks of order shipment.  If you require a faster delivery, please contact us for shipping estimates.  International customers should note that they may be responsible for paying any duties or customs tariffs assessed by the destination country customs authorities. Generally, you will receive a notice from your local delivery service if there are import fees associated with the import of your GoGoGear merchandise. GoGoGear makes no representations as to whether there will be import duties or the cost of those duties.  No refunds or exchanges will be permitted if a customer fails to pay duties or fails to accept delivery of the merchandise. Customers will NOT be reimbursed for customs duties or taxes if incurred.

Please note, due to the high number of exchanges requested GoGoGear will pay discounted shipping on the initial purchase only, if offered. The shipping cost of the return and the shipping cost of an exchange are the responsibility of the customer.  GoGoGear will assess any additional fees prior to shipping an exchange in the amount of $10 for the UK, US and Canada.  PLEASE SELECT YOUR SIZE CAREFULLY. If in doubt, just email us at: desireeE@scooter-girls.com.  Our objective is to get you the correct size the first time.

LIMITED WARRANTY GoGo Gear comes with a one year limited warranty against defects in materials and manufacturing. This does not include normal wear and tear or damage resulting from a fall, slide or crash. Should you feel your product is defective, please contact us with a description of the issue and, if possible, photos. Should we determine the cause is due to a defect, we will repair the item (when possible) or replace it. If for ANY reason you are not happy with your GoGo Gear product, you are welcome to return it within seven (7) days of purchase and receive a full refund (less shipping). You are responsible for the cost of shipping the product back to us for exchanges or returns for refund. Please note, we do not refund shipping costs if you return the product for refund. If you need to return an item, simply login to your account, view the order using the "Completed Orders" link under the My Account menu and click the Return Item(s) button. We'll notify you via email of your refund once we've received and processed the returned item.

Videos Hide Videos Show Videos